Chapter 2 Setup Follow the steps below to connect the printer. 1 Turn on the printer. After starting the printer, check that the "SimpleAP Start" is printed. If it is not printed, you need to enable SimpleAP mode in interface settings mode. 2 Activate Windows Wireless Network Connection and select [EPSON_Printer] as the connection device on the screen that appears. If the window to enter a pass phrase appears, enter "12345678”. Default settings on printer are the following values. 3 When connecting to the printer is complete, setup the Wireless LAN using the network setup tool, Epson TM-T88VI Utility for Windows or EpsonNet Config.
For details about Epson TM-T88VI Utility for Windows, see TM-T88VI Utility User's Manual. For details about EpsonNet Config, see EpsonNet Config User's Manual. 2 4 When setting the wireless LAN is complete, remove the wired cable (LAN/USB) and restart the printer. Setting up Using a USB Connection from a Windows Computer Necessary Items Prepare the following items. • Computer for setting: Windows 10/8/7/Vista • Utility for setting: TM-T88VI Utility for Windows • USB cable Follow the steps below to connect the printer. 1 Connect the printer to a PC via the USB cable. 2 Turn on the host computer. 3 Turn on the printer. 4 Start up the TM-T88VI Utility for Windows.
35 Network mode SimpleAP mode SSID EPSON Printer _ Pass phrase 12345678 IP Address 192.168.192.168