Chapter 1 Product Overview Control Panel (POWER) LED ERROR LED FORWARD button RELEASE LED SLIP LED REVERSE button RELEASE button Buttons 1 FORWARD button Pressing this button once feeds the slip paper by one line. Holding this button down feeds the slip paper continuously. REVERSE button • Pressing this button once reverses the slip paper by one line. Holding this button down reverses the slip paper continuously. • Turning on the power switch while pressing this button starts the self-test. (For details about the self-test, see "Self-test Mode" on page 42 .) RELEASE button Pressing this button releases the slip paper. LED POWER LED (green) • Lights when the power supply is on.
• Goes out when the power supply is turned off. ERROR LED (red) Lights or flashes when the printer is offline. • Lights after the power is turned on or after a reset (offline). Automatically goes out after a while to indicate that the printer is ready. • Flashes when an error occurs. (For details about the flash codes, see "Error Status" on page 15 .) • Goes out during regular operation (online). 13