English 2. For a journal roll paper jam, cut with scissors or a knife, as shown in illustration 10 , and remove the take-up spool. 3. Cut the paper from the paper rolls as shown in illustration 11 . 4. If paper is caught in the automatic cutter, open the cutter blade by turning the gear in the direction shown in illustration 12 . 10 ✄ 11 ✄ 12 5. Move the OPEN ↔ LOCK lever on each side of the printer in the direction shown in illustration 13 ; the cutter opens automatically. 6. Pull the paper out gently. If it tears, remove any pieces. 7. If necessary, remove the print head cover. Loosen the screw on the right as shown in illustration 14 .
(Replace it by sliding the tab in the slot, and fasten the screw.) 8. After clearing all paper, close and lock the cutter unit (lock both locks), and reinstall the paper rolls. OPEN LOCK 13 14 TM-U950 User’s Manual 9