CHARGING STEPS 1) DIAGNOSIS Checks the battery's initial condition including voltage, state-of-charge, and health, to determine if the battery is stable before charging. 2) DESULPHATION Uses voltage or high-frequency pulses to break down the sulfates that have built up over time in the aging battery to optimize life and performance. 3) PRE-CHARGE Starts the charging process with a low stable current that gradually increases until the battery capacity returns 25%. This reduces the stress put on batteries by sudden surges. 4) SOFT START Provides a medium stable current until the battery capacity returns 50%.
5) BULK CHARGE Begins the Bulk charging process based on the condition of the battery until the battery capacity returns 80%. 6) ABSORPTION Brings the charge level to 100% by delivering small amounts of current to provide a safe, efficient charge. This limits battery gas emission and prolongs life. EN | 11