Figure 2.2.1 Note: If the battery is properly connected, the 25% indicator will flash. If it is not properly connected, or the voltage is too low, the indicator will not light up. In this case, normal charging is not possible, and only SUPPLY mode works. 3. Press MODE to toggle among charging modes. 4. After charging mode is selected, charging will start automatically within 3 seconds. The charger will resume charging using the previous mode when it is powered on again. Note: During charging, the indictor for the charging mode selected will be solid white and the indicators for SoC will also light up. Refer to the table below.
Indicators Status Flashes when the SoC is below 25%; Becomes solid when the SoC reaches 25%. 25% Flashes when the SoC is between 25-50%; Becomes solid when the SoC reaches 50%. 50% EN 13