1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33094 1.1 Introduction 1. PRODUCT OVERVIEW 1.1 Introduction Thank you for choosing the TOSHIBA B-EX4T2/D2 series bar code printer. This Owner’s Manual contains from general set-up through to how to confirm the printer operation using a test print, and should be read carefully to help gain maximum performance and life from your printer. For most queries please refer to this manual and keep it safe for future reference. Please contact your TOSHIBA TEC representative for further information concerning this manual. 1.2 Features 1.3 Unpacking This printer has the following features:
The print head block can be opened providing smooth loading of media and ribbon. Various types of media can be used as the media sensors can be moved from the centre to the left edge of the media. Web based functions such as remote maintenance and other advanced network features are available. Superior hardware, including the specially developed 8 dots/mm (203 dots/inch) thermal print head which will allow very clear print at a printing speed of 3, 6, 10, or 12 inches/sec. and 3, 5, 8, 10, or 12 inches/sec. with 11.8 dots/mm (300 dots/inch) thermal head. 23.6 dots/mm (600 dpi) thermal print head which will allow very clear print at a printing speed of 2, 3, 4, 5, or 6 inches/sec. NOTES: 1.
Check for damage or scratches on the printer. However, please note that TOSHIBA TEC shall have no liability for any damage of any kind sustained during transportation of the product. 2. Keep the cartons and internal packing for future transportation of the printer. Besides the optional Cutter Module, there is also an optional Peel off Module, RS-232C I/F card, Centronics I/F card, Expansion I/O Card, Wireless LAN I/F card, the RTC/USB host I/F card. Unpack the printer as per the Unpacking Instructions supplied with the printer. E1- 1 B-EX4T2/D2 B-EX4T2 203dip 300dpi 600dpi 3ips 3ips 2ips 6ips 5ips 3ips 10ips 8ips 4ips 12ips 10ips 5ips 12ips 6ips