PLC-API tTaskCycleTime : TIME := T#0ms; (* task cycle time [TIME] *) fKp : FLOAT := 0; (* proportional gain *) tT1 : TIME := T#0ms; (* T1 *) tT2 : TIME := T#0ms; (* T2 *) tT3 : TIME := T#0ms; (* T3 *) END_STRUCT END_TYPE> tCtrlCycleTime : Cycle time with which the control loop is processed. This must be greater than or equal to the TaskCycleTime. The function block uses this input value to calculate internally whether the state and the output values have to be updated in the current cycle. tTaskCycleTime : Cycle time with which the function block is called. If the function block is called in every cycle this corresponds to the task cycle time of the calling task. fKp :
Controller amplification / transfer coefficient tT1 : Time constant T1 tT2 : Time constant T2p tT3 : Time constant T3 Requirements 5.5.12 FB_CTRL_PTn This function block provides a non-oscillating PTn transfer element with (n the functional diagram. Transfer function: TS4100 98 Version: 1.1 Development Environment Target System PLC libraries to include TwinCAT v2.8 PC (i386) TcControllerToolbox.lib TwinCAT v2.9 from Build 947 BC [} 10] TcControllerToolbox.lb6 TwinCAT v2.9 from Build 956 BX [} 10] TcControllerToolbox.lbx