User Manual of EM730 Series Inverter function codes F18.18 and F18.19). The user can set the current function code to 1 to clear the The EM730 series inverter has a watt-hour meter function (see the description of the current count. motor parameters (F01 group), inverter parameters, manufacturer parameters, power-on time You can set this parameter to 1 to restore the default settings of all parameters, except the (F12.15/16) and operating time (F12.17, 18). ★ This operation is irreversible. Please set it carefully. F12.15 and F12.16 are used together to check the cumulative power-on time of the inverter from delivery to the current moment (you only need to power on the inverter).
The cumulative power-on time is accurate to one minute and nearly 65536 hours (about 7.5 years) at most. If F12.15=50 and F12.16=33, it means that the current inverter has been powered on for 2 days, 2 hours and 33 minutes. ★ This parameter can be viewed only and cannot be changed or cleared. 262 Function code Function code name Parameter description Unit Default setting Attribute Mailing address F12.13 Power meter resetting 0: do not clear 1: clear 0 ● 0x0C0D Function code Function code name Parameter description Unit Default setting Attribute Mailing address F12.14 Restoration of default setting 0: no operation 1:
restoration of factory defaults (excluding the motor parameters, inverter parameters, manufacturer parameters, running and power-on time record) 0 〇 0x0C0E Function code Function code name Parameter description Unit Default setting Attribute Mailing address F12.15 Cumulative power-on time (h) 0 ~ 65535 h 0 × 0x0C0F F12.16 Cumulative power-on time (min) 0 ~ 59 min 0 × 0x0C10 Function code Function code name Parameter description Unit Default setting Attribute Mailing address F12.17 Cumulative running time (h) 0 ~ 65535 h 0 × 0x0C11 F12.18 Cumulative running time (min) 0 ~ 59 min 0 × 0x0C12