User Manual of EM760 High-Performance Inverter 301 F06.44 Time constant of pull-in current of magnetic pole 0.0~6000.0 ms 1.0 O 0x062C F06.45 Initial lead angle of magnetic pole 0.0~359.9 ° 0.0 O 0x062D F06.46 Speed tracking proportional gain of synchronous motor 0.00~10.00 1.00 O 0x062E F06.47 Speed tracking integral gain of synchronous motor 0.00~10.00 1.00 O 0x062F F06.48 Filtering time constant of speed tracking of synchronous motor 0.00~10.00 ms 0.40 O 0x0630 F06.49 Speed tracking control intensity of synchronous motor 1.0~100.0 5.0 O 0x0631 F06.50 Speed tracking control threshold of synchronous motor 0.00~10.00 0.20 O 0x0632 F06.51 Rise time of injected active current of synchronous motor 0.1~50.0 s 5.0 O 0x0633 F06.52 Linear transition code value of compensation in dead zone 1~1000 15 O 0x0634 F06.53 Excitation current setting for frequency switching from F3 to F4 0.0~100.0 % 50.0 ● 0x0635 F06.54 Switching frequency 3 0.00~50.00 HZ 6.00 O 0x0636 F06.55 Switching frequency 4 0.00~60.00 HZ 10.00 O 0x0637 F06.56 Steady load torque and current setting 0.0~150.0 % 30.0 O 0x0638 F06.57 Filtering time constant of current 0.001~5.000 ms 0.350 O 0x0639 F06.58 Start injection pulse width 0.020~5.000 ms 0.050 O 0x063A F06.59 Switching frequency 1 0.00~F06.60 HZ 0.00 O 0x063B F06.60 Switching frequency 2 0.00~(F06.54/2) HZ 1.00 O 0x063C