User Manual of EM760 High-Performance Inverter See the table below for details. The final setting of the main frequency source A is also dependent on the DI terminal status: Table 6-1 Detailed Setting of Main Frequency Source A 6.2.2.1 Setting main frequency via digital frequency (1) Set F00.06=0 (main frequency setting) (2) Set F00.04=0 (digital frequency setting) (3) Set the desired running frequency in F00.07 6.2.2.2 Setting main frequency via analog (AI) (1) Set F00.06=0 (main frequency setting) (2) Set F00.04=1~4 (AI1~AI4 setting) (3) Depending on the analog channel selected, select corresponding analog input type from F02.62~F02.65.
(4) Select the offset curve of the corresponding analog channel in F02.32. For setting method, see 6.5.7. (5) For the final percentage of analog setting, the offset value prevails. The value 100% corresponds to F00.16 (maximum frequency) . (6) Set corresponding voltage or current for the selected analog channel from the external side. You can see current frequency setting via F18.01. 80 Terminal Function Status Description Priority 11-14: multi-segment speed terminals 1-4 If one is valid, the multi-segment speed mode will be enabled (F08.00-F08.14). 1 51:
switching of main frequency source to digital frequency setting Valid, depending on the digital frequency setting F00.07,the same as the function code F00.04=0 2 52: switching of main frequency source to AI1 Valid, depending on the AI1 input percentage setting, the same as the function code F00.04=1 3 53: Switching of main frequency source to AI2 Valid, depending on the AI2 input percentage setting, the same as the function code F00.04=2 4 54: switching of main frequency source to AI3 Valid, depending on the AI3 input percentage setting, the same as the function code F00.04=3 5 55:
Switching of main frequency source to high-speed pulse input Valid, depending on the HDI input percentage setting, the same as the function code F00.04=5 6 56: switching of main frequency source to communication setting Valid, depending on the communication input, the same as the function code F00.04=6 7 -- All invalid, depending on the setting of function code F00.04 8