1.5 Schematic diagram of panel and terminal block 1 2 3 4 5 6 7 8 9 NL FA COM 4 8 5 - Parallel interface 4 8 5 + AC-INPUT AC-OUTPUT L N L - N DC-INPUT + 10 11 12 13 14 15 16 17 18 Figure 1-3-1 Schematic diagram of panel and wiring terminal(6Kva) 1 2 3 4 5 6 7 8 9 AC-OUTPUT L N AC-INPUT L N 4 8 5 + NL FA COM 4 8 5 - DC-INPUT - DC-INPUT + 17 16 15 14 Figure 1-3-2 Schematic diagram of panel and wiring terminal(9~15Kva) Definition of each serial number ： 12 13 10 11 1.6 Panel operating instructions 1) Snap switch:
the switch must be in lock state, otherwise it cannot be started;When the machine is in the normal working state, if the buckle switch is pulled to the unlocked state, the machine will shut down immediately; 2) LCD display screen: the working status of each module can be queried through the display screen; 3) "On/off" button:
used for inverter cold start or shutdown.When it is necessary to turn on/off, press and hold this key for about one second until the LCD display shows "please wait while testing", indicating that the power on is successful, and release the key;When the machine is in normal working state, press and hold the "on/off" key for about six seconds until the LCD displays "the system has been shut down, please press the start key", indicating that the shutdown is successful.
If you want to close a single module, please pull out the snap switch of the module; 7 1 Handle 7 Ope ration indicator 13 Grounding nut 2 Snap switch 8 Fau lt indicator 14 AC input zero line (n) 3 Air inlet 9 Mo dule fixing hole 15 AC input live wire (L) 4 LCD display panel 10 DC Input -48V 16 AC output zero line (n) 5 On/off button 11 DC Input 0V 17 AC output live wire (L) 6 Page turning key 12 Co mmunication interface 18 Parallel interface