3-4 Operation Procedure (Example: Factory Default) (Change the A002 setting.) •Change the RUN command source to the control terminal "01". 0k1 3 Press . 4. The code of the monitor mode is displayed (as "A002"). Operation ak0k0k2 •Press the Enter key to fix the changed setting data. •The RUN command source is changed to the control terminal, and the RUN command LED indicator will go off. •You can now change to another extended function code. Press . (3 times) 5. The extended function mode is displayed (as "A---"). •You can now move to another extended function mode, the monitor mode, and the basic function mode.
ak-k-k- Setting Function Codes •You can enter codes for the monitor mode, basic function mode, and extended function mode directly, as well as through the scrolling method. •Below is an example where code d001 of the monitor mode is changed to extended function A029. 1. Display the code of the monitor mode (as "d001"). dk0k0k1 (Continued to the next page) 3-13 Press and simultaneously.