3-6 Parameter Transition 3-6 Parameter Transition Operation and sequence of code display Operation and sequence of monitor/data display Press the Increment/Decrement key to scroll through codes in the code display and to increase/decrease the number in the data display. Press either key until you see the desired code or data. For fast-forwarding, press and hold either key. 3 Monitor Mode Press the Mode key in the code display to display its monitor value. Operation dk0k0k2 0.0k0 (Monitor display) *1 or Press the Mode/Enter key in the monitor display to return to its code display. Note: By factory default, appears at power-on. 0.0k0 Press the Mode key in this status to display .
dk0k0k1 fk0k0k1 Press the Mode key in the code display to display its data. Function/Extended Function Mode (Data display) *1 *2 To upper limit Data setting ak0k0k1 Press the Increment/Decrement key to increase/decrease the number. 3k0.0k1 (Set the desired number.) Press the Enter key in the data display to fix the data and to return to the code display. Press the Mode key in the data display to return to its code display without changing the data. bk0k0k1 or 2k9.9k9 To lower limit ck0k2k2 *1. The setting displayed varies depending on the parameter. *2. To change the data, be sure to press the Enter key. 3-13 dk0k0k1 dk1k0k4 fk0k0k4 ak0k8k5 3k0.0k0 bk1k3k1 ck0k2k1