GigE and USB 3.0 Camera Support General Industrial Camera Support AutoVISION/Visionscape PC Based vision will support both Omron Sentech STC-M GigE cameras and Omron Sentech STC-M USB 3.0 cameras. The system can handle a mix of both types of cameras. Older Sentech cameras are not officially supported. Omron Sentech STC-M GigE Camera Support The bulk of this manual will concentrate on how to ensure a fast reliable connection between the PC and GigE cameras. GigE cameras transmit image packets via UDP, so are susceptible to dropped packets. Strict attention must be paid to the choice of the PC as well as the NIC card.
Strict attention must also be paid to setting up the NIC card and Visionscape to operate with the correct Packet Size, Inter Packet Delay, Receive Buffers, and Interrupt Moderation necessary to ensure no packet loss. The following is the current list of supported Omron Sentech STC-M GigE cameras models. All cameras are C-Mount. All cameras are PoE (Power over Ethernet). GigE cameras support data transfer rates up to Using Sentech STC-M Cameras with AutoVISION and Visionscape Page 4 of 32 125 MB/s. They support cable lengths of up to 100 meters. Model No.
Monochrome/ Color Resolution Frame Rate Pixels (H x V) Sensor Size Cell Size (H x V, μm) Shutter Type STC-MBS43POE Monochrome 0.4M 282fps 728 x 544 1/2.9" 6.9 x 6.9 Global STC-MCS43POE Color STC-MBS163POE Monochrome 1.6M 70.7fps 1456 x 1088 1/2.9" 3.45 x 3.45 Global STC-MCS163POE Color STC-MBS202POE Monochrome 2M 54.6fps 1624 x 1240 1/1.7" 4.5 x 4.5 Global STC-MCS202POE Color STC-MBS312POE Monochrome 3.2M 34.9fps 2048 x 1536 1/1.8" 3.45 x 3.45 Global STC-MCS312POE Color STC-MBS500POE Monochrome 5 M 21.9fps 2448 x 2048 2/3" 3.45 x 3.45 Global STC-MCS500POE Color STC-MBS1242POE Monochrome 12M 9.2fps 4000 x 3000 1/1.7" 1.85 x 1.85 Rolling STC-MCS1242POE Color STC-MBS2041POE Monochrome 20M 5.5ps 5472 x 3648 1" 2.4 x 2.4 Rolling STC-MBC2041POE Color