5. Start the vehicle. When V4500 Plus detects that the vehicle is started, the icon will become solid ON and the will turn on and blink. It means you can disconnect the jump start clamps from the vehicle battery. 6. Disconnect the jump start clamps from the vehicle battery. When V4500 Plus detects that the jump start clamps are disconnected from the vehicle battery, the , and icons will all turn OFF. 7. Press and hold the button for 7 seconds to power off V4500 Plus and place the jump start clamps back to its two sides. (Without any action in 15 seconds, V4500 Plus will automatically shut down.) Note:
If the vehicle fails to get started, please disconnect the jump start clamps from the vehicle battery. You can try again 20 seconds later. We strongly recommend that you do not jump start a vehicle for more than three times within two minutes. 11