VEDA HCT User Manual the bit set function will not be executed. And when it is released, the “Bit set” function will be executed immediately. But the action is not valid when the “Execute Setting” is “Reset”. The “Bit Set” component has other property pages. For example, in the “Indicator Light” property page, it is recommended to check the “Use Indicator” option and set an address to monitor the “Bit set” component state if the “Use Graphics” option is checked in the “Graphics” property page. The details can be seen in the “System Manual/ Component/ Indicator Light”. The following brief example introduces the process for setting the HMI internal address LB100 into the “Inverse” attribute.
In the software menu, click “Component/ Switch/ Bit Set” to open the following dialog. The default action is “Press”. The default Execute Setting is “On”. The default address is “LB0”. They are modified into the required as follows. 97