VEDA HCT User Manual 3 Find/Replace 4 Cut Cut away the selected component and temporarily save it on the clipboard. 5 Copy Copy the selected component and temporarily save it on the clipboard 6 Multi-Copy 7 Paste Paste the content of the clipboard onto the project. 8 Delete Delete the selected components from the project. 9 Inching Move left/right/up/down for one unit. 10 Alignment 11 Size 12 Layer 13 Same Color 14 Group Integrate many components. 15 Ungroup Make the components of group to restore into individuals. 65 Set the designated searching range and search the bit address/ word address or replace with a new bit address/ word address/.
Set the copy range, quantity, interval and direction, and make the addresses change in any rule to obtain more components (many components can be copies and pasted integrally, and the addresses will change orderly). It is effective only when many components are selected. It is used to align these components on the left, on the vertical middle line, on the right, on the up, on the horizontal middle line, or on the bottom. It is effective only when many components are selected. It is used to set these components to the same width, height or same size. It is effective only when the component is selected.
It is used to set the component to the top, to the bottom, to the previous layer, to the next layer, or set many components in the same horizontal space or in the same vertical space. It is effective only when many components are selected. It is used to set all components in the same color.