1 Setup of Camera & Software Vision 1-2 Setup of Camera & Software Vision (FJ-S ЈЈЈЈ Series) 1-2 Setup of Camera & Software Vision (FJ-S ЈЈЈЈ Series) 1-2-1 Prepare hardware 1 System cofiguration: 1-2-1 Prepare hardware PC Camera Application software (Installation CD, Dongle) Camera cable (LAN) FJ-VSG Ethernet RS-232C EtherNet/IP Camera cable (Power, I/O) FJ-VSP PLC / Sensor / External power supply, etc. First prepare hardware components to construct the system. • Required: PC • Required: GigE Camera (in the quantity required) • Required: Application software (Installation CD and Dongle) • Required: Gigabit Ethernet adapter (PoE type is recommended) • Required: Camera cable (LAN) • As needed:
Camera cable (Power, I/O) • As needed: External power supply unit for cameras (In case PoE is not used) • As needed: PoE Injector • As needed: Switching HUB (In case multiple cameras are used) • As needed: LAN cable Shown below are the combinations of quantity of cameras, and type of power supply. 1-3 FJ Series (Camera & Software Vision Package) PC Vision System Camera Setup Guide (Z428-E1) Index Quantity of cameras Power supply 1 1 unit PoE Gigabit Ethernet adapter 2 1 unit External power source 3 1 unit PoE Injector 4 Multiple units External Power supply unit (for each cameras) 5 Multiple units PoE Switching HUB 6 Multiple units PoE Injector