1 Setup of Camera & Software Vision Precautions for Correct Use • Install and use either 32-bit or 64-bit software according to your environment. Following the steps below, assign a camera number for each camera connected. 1 Launch the tool from Start menu - OMRON - Camera Configuration Tool . 2 Select camera from the list to each camera number (CameraNo). When select CameraID cell, the connected camera list will be displayed. 3 Click OK . Detailed setting for cameras 1 Click Setting button on Camera Configuration Tool , then detailed setting dialog for selected camera will appear. 2 The parameters can be changed on the detailed setting dialog. These are the parameters.
1-12 FJ Series (Camera & Software Vision Package) PC Vision System Camera Setup Guide (Z428-E1) Assign a camera number Category Item Value Description External trigger Line invert • Enable • Disable Invert trigger polarity. • Enable: Invert (Photo coupler OFF) • Disable: Not invert (Photo coupler ON) Trigger delay time(μs) 0 to 1000000 Set the time from recognizing trigger to releasing the shutter of a camera. Trigger sensing pulse-width time(μs) 0 to 20000 Set the pulse-width time for recognizing trigger of a camera.