1 Setup of Camera & Software Vision 1-3 Setup of Camera & Software Vision (FJ-S ЈЈЈЈ 2 Series) 1 3 After installation of camera device driver, then setup for dongle device driver starts. Please in- stall it with default option, if there is no special reason to change. 1-3-4 Configure Gigabit Ethernet adapter 4 After installation of dongle device driver, return to setup program (step 1.). Click End button and restart PC. Precautions for Correct Use • Both FJ-S ЈЈЈЈ and FJ-S ЈЈЈЈ 2 cameras cannot be used at the same time from the PC. • Please install either Device Driver for FJ-S Ј or Device Driver for FJ-S Ј 2 .
1-3-4 Configure Gigabit Ethernet adapter To be able to connect the camera to the Ethernet card, you must configure Gigabit Ethernet adapter. The description in this section assume connecting one camera per one ethernet adapter. In case you need to connect multiple cameras, please refer to Connecting multiple cameras on page 1-25 descri- bed later. 1-21 FJ Series (Camera & Software Vision Package) PC Vision System Camera Setup Guide (Z428-E1)