1 Setup of Camera & Software Vision 1-3 Setup of Camera & Software Vision (FJ-S ЈЈЈЈ 2 Series) 4 Set Jumbo Packet (Jumbo Frame) , Receive Buffers , and Transmit Buffers respectively. Your network adapter may show the parameters in different name, or some of the parameters are not supported. Firewall settings 1 Disable the security settings for the Ethernet port to which the camera is connected. 1-3-5 Changing the PC Power Settings 1-3-5 Changing the PC Power Settings 1 Launch the tool from the Start Menu - SentechSDK - StPowerCtrl . 2 On the StPowerCtrl screen, uncheck all the items. (Disables the power saving setting.) 3 Click the Read button. 4 Click the Exit button.
1-3-6 Setup of camera connection Setup the camera connection following the steps below. 1 Connect the camera cable (Power, I/O) to DC 12V power source. Additional Information For wiring, refer to the instruction manuals. 2 Connect the camera cable (LAN) and camera cable (Power, I/O) to FJ camera, and turn on the power. 3 Launch the tool from Start menu - SentechSDK - GigECameraIPConfig . 4 From the Device Selection screen, select the camera to use. 1-23 FJ Series (Camera & Software Vision Package) PC Vision System Camera Setup Guide (Z428-E1)