1 Setup of Camera & Software Vision 1-3 Setup of Camera & Software Vision (FJ-S ЈЈЈЈ 2 Series) 1 1-3-6 Setup of camera connection 9 On the GigE Camera IP Config screen, uncheck DHCP and put a check in the box for Persistant IP . 10 Enter the address and click Apply . Additional Information If it is different from the IP address set in Step 6, this setting will be reflected when the camera is restarted. Connecting multiple cameras There are following ways for connecting multiple cameras. • Install multiple network adapters. • Use network adapter with multiple ports. • Use switching HUB. Refer to 1-3-6 Setup of camera connection on page 1-23 for connection settings.
1-25 FJ Series (Camera & Software Vision Package) PC Vision System Camera Setup Guide (Z428-E1)