Chapter 2 System Components Setting Up a Job in AutoVISION AutoVISION is a critical component of the Vision HAWK’s functionality. Designed for use with the Vision HAWK, AutoVISION provides an intuitive interface, step-by-step configuration, and a library of presets that allow easy setup and deployment. For more complex vision applications, the system can be upgraded from AutoVISION to Visionscape. 1. Configure Vision HAWK hardware. 1 3 7 2 8 6 See Appendix A, Connector Pinouts , for Vision HAWK pin assignments. Note: Additional cables available in the Omron Microscan Product Pricing Catalog.
2-22 Vision HAWK Smart Camera Guide Item Description Part Number 1 Vision HAWK Smart Camera GMV-6800-XXXXG 2 QX-1 Interface Device 98-000103-02 3 Cordset, Common, M12 12-pin Plug to M12 12-pin Socket, 1 m 61-000162-01 4 Cordset, Host, Serial, M12 12-pin Plug to DB9, 1 m 61-000152-01 5 Cordset, Host, Serial, M12 12-pin Socket to DB9, 1 m 61-000153-01 6 Power Supply, M12 12-pin Socket, 1.3 m 97-000012-01 7 Cordset, Host, Ethernet, M12 8-pin Plug to RJ45, 1 m 61-000160-03 8 Trigger, M12 4-pin Plug, NPN, Dark On, 2 m 99-000020-02