Appendix D CloudLink Web HMI Connecting To launch CloudLink, use your favorite web browser and enter the address of your device in the browser’s address bar. For example, if you have a Omron Microscan smart camera on your network at address 10.20.1.123 , you would enter: CloudLink also works with Visionscape Software and with AutoVISION ’s Emulator. To connect to a software-based job running in FrontRunner or AutoVISION: First, be sure the job is running, and then type the following into your browser’s address bar: Note: You must specify port 8080 for a PC-based connection.
If you are connecting to a PC-based system from a different machine on the network, use the IP address of the PC instead of the local host. For example, use http://10.20.1.234:8080 if the PC’s IP address is 10.20.1.234 . Once you press the Enter key, you should see the following home page: D-2 Vision HAWK Smart Camera Guide Click icon the CloudLink Dashboard to launch the application. Click icon