2 AutoVISION Button System Components AutoVISION Button The AutoVISION Button has three positions, selectable by the length of time the button is held down, and indicated by one, two, or three beeps and LED flashes in succession. It can also be used to send a trigger signal when Send Trigger is checked in AutoVISION software’s Connect view. When the trigger functionality is enabled, pushing the AutoVISION Button triggers the camera to capture an image. 1st Position: Blue Targeting Pattern The first AutoVISION Button position turns the targeting system on. This overrides any other targeting modes that have been configured. 2nd Position:
Auto Calibration The second AutoVISION Button position starts the Auto Calibration process, which selects the appropriate photometry and focus settings for the camera. The selected values are then saved for power-on. 3rd Position: Teach The third AutoVISION Button position sets the Match String to the next OCR string or symbol data that is decoded. Vision MINI Smart Camera Guide 2-11