7.3.8. FHRUNSNDCMD Function Send a no-procedure command to the Vision Sensor Syntax FHRUNSNDCMD([Argument1], [Argument2], [Argument3], [Argument4], [Argument5], [Argument6], [Argument7]) Parameter Remarks *1: “SP” is space *2: The command argument n depends on the number of non-procedural command 48 Argument Input/Output Data type Description Argument1 Input INTEGER Number of no-procedural command arguments to be sent to the Vision Sensor (0 to 5) Argument2 Input STRING No-procedural commands to be sent to the Vision Sensor Argument3 - Argument7 Input STRING Argument3: Argument 1 of the no- procedure command sent to the Vision Sensor(string). Argument4:
Argument 2 of the no- procedure command sent to the Vision Sensor(string). Argument5: Argument 3 of the no- procedure command sent to the Vision Sensor(string). Argument6: Argument 4 of the no- procedure command sent to the Vision Sensor(string). Argument7: Argument 5 of the no- procedure command sent to the Vision Sensor(string). Sends a no-procedure command to the Vision Sensor, concatenating the parameters according to the following format. If the number of no-protocol command arguments is out of the input range, an error is returned. No-protocol command SP(*1) Command argument 1 SP Command argument 2 SP … Command argument n(*2)