Руководство по эксплуатации Omron Microscan GigE Cameras (EN)

Visionscape ® GigE Camera Configuration Guide Hardware Required *Important: Visionscape licenses are implemented by means of a USB hardware key. The key must be present in the host PC before Visionscape software will recognize Omron Microscan GigE Cameras. Power and Signal Connections Visionscape GigE Camera (Back View) RJ45 Ethernet Connection 4 1 3 M8-3 Power 2 4 M8-4 Trigger and Strobe LED 1 and 2 1 3 Typical System Configurations Single Camera Option – Single Port NIC Notes: For the highest throughput and optimal use of GigE bandwidth, each camera should be connected to its own NIC port (as shown in Dual Camera Option 1).

In applications where bandwidth is not an issue, cameras can be connected to the host PC via a GigE switch (as shown in Dual Camera Option 2). Refer to the Visionscape GigE Camera Guide for information about wiring Visionscape PCIe Digital I/O Boards. Consult with the Omron Microscan Solutions Group concerning applications that use more than 4 (up to 8) cameras, or concerning applications using color cameras. Omron Microscan GigE Cameras must be connected to the host PC using a private network – not one shared with other applications, such as a factory floor or office data network.

It is strongly recommended that the host PC NIC be set to a private static Class C IP address, such as 192.168.0.100/255.255.255.0. Visionscape GigE Cameras must be connected to a network interface card (NIC) (commonly referred to as an Ethernet card). All components must be capable of GigE operation (1000BASE-T). Ethernet cables should be CAT5E or CAT6 (recommended).

5 1 14 4 6 12 Host PC with Single Port NIC Dual Camera Option 1 – Dual Port NIC (Maximum Bandwidth) 5 14 1 4 6 13 14 1 4 6 5 Host PC with Dual Port NIC Dual Camera Option 2 – GigE Switch (Shared Bandwidth) 5 14 1 4 6 11 5 GigE Switch Host PC with Single Port NIC CAT6 Cable 12 14 1 4 6 Copyright ©2019 Omron Microscan Systems, Inc.

84-217013-02 Rev L Item Description Part Number 1 Visionscape GigE Camera 98-000XXX-01 2 Basic Visionscape GigE Camera License* VGL0-0DD0 3 Basic Visionscape GigE Camera with IntelliFind® License* VGL0-1DD0 4 Power Supply or Camera Power M8-3 to Pigtail 5M 98-000138-01 98-000129-01 5 Camera Strobe/Trigger M8-4 to Flying Lead 5M 98-000126-01 6 CAT6 Ethernet with Jackscrews to RJ45 High Flex 2M or CAT6 Ethernet with Jackscrews to RJ45 High Flex 5M 98-000133-01 98-000134-01 7 PCIe DIO Card 16 In 16 Out Isolated with Cable and Terminal 98-000130-01 8 PCIe DIO Card 16 In 16 Out Isolated with Cable and Terminal (PNP) Current Sourcing 98-000142-01 9 GigE 4 Port Switch – POE Injection 98-000124 10 GigE Power Injector – 2 Inputs and 2 Outputs 98-000125 11 GigE 5 Port Switch 98-000131 12 Single Port GigE Network PCIe Interface Card 98-000140 13 Dual Port GigE Network PCIe Interface Card 98-000132 14 C-Mount Lens 98-9280057X Power Connector Pin Signal Description 1 Vcc BROWN WIRE; 24 volts @ 350ma typical (~3.5W) 8VDC @ 370ma thru 30VDC @ 120ma 3 Ground BLUE WIRE; Vcc Return 4 N/C BLACK WIRE Strobe/Trigger Connector Pin Signal Description 1 TrigIN+ BROWN WIRE; External Trigger Input + 2 TrigIN– WHITE WIRE; External Trigger Input – 3 Strobe BLUE WIRE; Strobe Output 4 U(ext) BLACK WIRE; User-supplied voltage for Flash output:

5-30VDC (24VDC @ 16ma recommended)

Стр. 1

Visionscape GigE Camera Configuration Visionscape GigE Camera Accessories *Important: Visionscape licenses are implemented by means of a USB hardware key. The key must be present in the host PC before Visionscape software will recognize Omron Microscan GigE Cameras. Note: Additional accessories are available in the Omron Microscan Product Pricing Catalog. www.microscan.com Copyright © 2019 Omron Microscan Systems, Inc.

Accessory Part Number Description Starter/Evaluation Kit GigE Camera Starter/Evaluation Kit 98-000139-01 Visionscape GigE Camera Starter/Evaluation Kit Power Supply Power Supply 98-000138-01 GigE Camera Power Supply Kit, Universal AC Cables Camera Strobe/Trigger 98-000126-01 M8-4 to Pigtail 5M Camera Power 98-000129-01 M8-3 to Pigtail 5M CAT6 Ethernet 98-000133-01 CAT6 Ethernet Cable with Jackscrews to RJ45 High Flex 2M CAT6 Ethernet 98-000134-01 CAT6 Ethernet Cable with Jackscrews to RJ45 High Flex 5M I/O Boards PCIe DIO Card 98-000130-01 16 In 16 Out Isolated with Cable and Terminal PCIe DIO Card 98-000142-01 16 In 16 Out Isolated with Cable and Terminal (PNP) Current Sourcing GigE Port Adapters 4 Port Switch 98-000124 GigE 4 Port Switch – POE Injection Power Injector 98-000125 GigE Power Injector – 2 Inputs and 2 Outputs 5 Port Switch 98-000131 GigE 5 Port Switch Single Port Interface Card 98-000140 Single Port GigE Network PCIe Interface Card Dual Port Interface Card 98-000132 Dual Port GigE Network PCIe Interface Card Lenses C-Mount Lens 92-92800571 8.5 mm Lens C-Mount Lens 92-92800572 12 mm Lens C-Mount Lens 92-92800573 16 mm Lens C-Mount Lens 92-92800574 25 mm Lens C-Mount Lens 92-92800575 35 mm Lens C-Mount Lens 92-92800576 50 mm Lens C-Mount Lens 92-92800577 75 mm Lens Mounting Option Demo Stand 98-HEDSL Visionscape GigE Camera Demo Stand Licenses Basic Visionscape GigE Camera License* VGL0-0DD0 Visionscape GigE Camera License USB Hardware Key Basic Visionscape GigE Camera with IntelliFind® License* VGL0-1DD0 Visionscape GigE Camera with IntelliFind® License USB Hardware Key Documentation Omron Microscan Tools Drive 37-000010-01 Software, Documentation, links to website

Стр. 2