A Visionscape GigE Camera Connectors Connector Pinouts Strobe and Trigger Connector The standard I/O connector consists of one optoisolated input “Trigger” and one optoisolated output “Flash”. Figure A–2 shows the pinout of the strobe and trigger connector. FIGURE A–2. Strobe and Trigger Connector Strobe and Trigger Connector Table A–3 lists the supplier for the strobe and trigger connector mating cable. TABLE A–3. Serial and Secondary I/O Connector Mating Cable Table A–4 describes the strobe and trigger connector signals. TABLE A–4. Strobe and Trigger Connector Signals Connector Type: M8/4 (Plug with Male Pins) Mates with Type:
M8/4 (Socket with Female Pins) Visionscape GigE Camera Guide A-3 Supplier Part Number Description Omron Microscan 98-000126-01 Visionscape GigE Camera Strobe/Trigger M8-4 to Pigtail 5M Pin Signal Name Description 1 TrigIN+ BROWN WIRE; External Trigger Input + 2 TrigIN- WHITE WIRE; External Trigger Input - 3 Flash BLUE WIRE; Flash Output 4 U (ext) BLACK WIRE; User-Supplied Voltage for Flash Output: 5 to 30VDC (24VDC @ 16ma recommended)