VLT ® 2900 Series Factory Settings All about VLT 2900 MG.29.A3.02 - VLT ® is a registered Danfoss trademark 87 PNU # Parameter description Factory setting Changes during opera- tion 4-setup Conv. index Data type 200 Output frequency range Clockwise only, 0-132 No Yes 0 5 Hz 201 Output frequency, 0.0 Hz Yes Yes -1 6 low limit f MIN 202 Output frequency, 132 Hz Yes Yes -1 6 high limit f MAX 203 Reference range Min ref.-Max ref. Yes Yes 0 5 204 Minimum ref RefMIN 0.000 Hz Yes Yes -3 4 205 Maximum ref RefMAX 50.000 Hz Yes Yes -3 4 206 Ramp type Linear Yes Yes 0 5 207 Ramp-up time 1 3.00 sec. Yes Yes -2 7 208 Ramp-down time 1 3.00 sec. Yes Yes -2 7 209 Ramp-up time 2 3.00 sec.
Yes Yes -2 7 210 Ramp-down time 2 3.00 sec. Yes Yes -2 7 211 Jog ramp time 3.00 sec. Yes Yes -2 7 212 Quick stop ramp-down time 3.00 sec. Yes Yes -2 7 213 Jog frequency 10.0 Hz Yes Yes -1 6 214 Reference function Sum Yes Yes 0 5 215 Preset reference 1 0.00% Yes Yes -2 3 216 Preset reference 2 0.00% Yes Yes -2 3 217 Preset reference 3 0.00% Yes Yes -2 3 218 Preset reference 4 0.00% Yes Yes -2 3 219 Catch up/slow down 0.00% Yes Yes -2 6 reference 221 Current limit 160 % Yes Yes -1 6 223 Warn. Low current 0.0 A Yes Yes -1 6 224 Warn. High current IMAX Yes Yes -1 6 225 Warn. Low frequency 0.0 Hz Yes Yes -1 6 226 Warn. High frequency 132.0 Hz Yes Yes -1 6 227 Warn.
Low Feedback -4000.000 Yes Yes -3 4 228 Warn. High Feedback 4000.000 Yes Yes -3 4 229 Frequency bypass, 0 Hz (OFF) Yes Yes 0 6 bandwidth 230 Frequency bypass 1 0.0 Hz Yes Yes -1 6 231 Frequency bypass 2 0.0 Hz Yes Yes -1 6