10-382 A/C and safety system 10. A/C and Safety System 10.2.7.4 Removal and refitting of airbag ECU Removal procedure Note: – Static electricity can cause the airbag to be triggered accidentally. Static electricity must be discharged before the servicing on the system for protection. The body can be touched for a short time. 1. Turn off all electrical appliances and the start switch. 2. Disconnect the battery negative termin al (refer to 3.1.6.1 Maintenance and inspection of battery ) 3. Remove the console assembly (refer to 8.3.4.22 Removal and refitting of console assembly ) 4.
Remove the rear of the rear face blowing duct (refer to 8.3.4.26 Removal and refitting of rear of rear face blowing duct ) 5. Remove the rear foot blowing duct front section assembly (refer to 8.3.4.28 Removal and refitting of rear foot blowing duct air distributor assembly ) 6. Remove the driver's airbag ECU. a. Disconnect 2 connectors of the driver's airbag ECU. VOYAH FREE