10. A/C and Safety System 10-159 A/C system 10.2.4.4 Removal and refitting of clock spring assembly Removal procedure Note: – Re-adjustment of the clock spring is necessary to remove the steering wheel. The clock spring is not replaced separately. If there is any fault, the combination switch and clock spring assembly shall be replaced as a whole. – This vehicle is equipped with a driver's airbag, please pay attention to the standard operation when removing the steering wheel. 1. Turn off all electrical appliances and the start switch. 2. Disconnect the battery negative terminal (refer t o 3.1.6.1 Maintenance and inspection of battery) 3.
Remove the driver’s airbag (refer to 10.9.2.1 Removal and refitting of driver’s ACU) 4. Remove the steering wheel (refer to 10.2.4.1 Removal and refitting of steering wheel assembly ) 5. Remove the steering column lower guard assembly (refer to 8.2.3.16 Removal and refitting of steering column lower shroud assembly ) 6. Remove the clock spring assembly. a. Disconnect the clock spring assembly connector. VOYAH FREE