10. A/C and Safety System 10-361 A/C and safety system A/C and safety system 10.2.5.2 Removal and refitting of driver’s ACU Removal procedure Note: – Static electricity can cause the airbag to be triggered accidentally. Static electricity must be discharged before the servicing on the system for protection. The body can be touched for a short time. – Note that if you do not operate as the instructions, it will affect the normal operation of the SRS and may cause injury to the driver. 1. Turn off all electrical appliances and the start switch. 2. Disconnect the battery negative terminal. Refer to 3.1.6.1 Maintenance and inspection battery 3. Remove the driver's ACU. a.
Use the special airbag removal tool H973607A00 to connect into the rear of the steering wheel and disengage the driver's airbag latch. b. Take out the driver's ACU ① as indicated by the arrow. c. Disconnect driver's airbag and horn connector. VOYAH FREE