10. A/C and Safety System 10-363 A/C and safety system 10.2.5.3 Removal and refitting of front passenger’s ACU Removal procedure Note: – Static electricity can cause the airbag to be triggered accidentally. Static electricity must be discharged before the servicing on the system for protection. The body can be touched for a short time. 1. Turn off all electrical appliances and the start switch. 2. Disconnect the battery negative terminal. Refer to 3.1.6.1 Maintenance and inspection battery 3. Remove the front ceiling lamp assembly (refer to 9.9.11.2 Removal and refitting of ceiling lamp assembly) 4.
Remove the rear ceiling lamp assembly (refer to 9.9.11.3 Removal and refitting of rear ceiling lamp assembly) 5. Remove the left and right sun visors (refer to 8.5.4.3 Removal and refitting of sun visor) 6. Remove the front and rear safety handles (refer to 8.5.3.1 Removal and refitting of safety handle) 7. Remove the roof inner trim panel assembly (refer to 8.5.61 Removal and refitting of roof inner trim panel assembly ) 8. Remove the front passenger's ACU. a. Disconnect the driver's ACU connector. VOYAH FREE