10-366 A/C and safety system 10. A/C and Safety System 10.2.5.5 Removal and refitting of left side curtain airbag assembly Removal procedure Note: – The removal and refitting of the left side curtain airbag assembly is described here, which can be referred to for the operations on the right side. – Static electricity can cause the airbag to be triggered accidentally. Static electricity must be discharged before the servicing on the system for protection. The body can be touched for a short time. 1. Turn off all electrical appliances and the start switch. 2. Disconnect the battery negative terminal (refer t o 3.1.6.1 Maintenance and inspection of battery ) 3.
Remove the A-pillar upper protective plate assembly (refer to 8.5.5.1 Removal and refitting of A- pillar upper protective plate assembly) 4. Remove the left B-pillar upper protective plate assembly (refer to 8.5.5.3 Removal and refitting of B- pillar upper protective plate assembly) 5. Remove the left C-pillar upper protective plate assembly (refer to 8.5.5.7 C-pillar upper protective plate assembly) 6. Remove the roof inner trim panel assembly (refer to 8.5.6.1 Removal and refitting of roof inner trim panel assembly ) 7. Remove the left side curtain airbag assembly. a. Disconnect the connector of left side curtain airbag assembly. VOYAH FREE