10-368 A/C and safety system 10. A/C and Safety System 10.2.6 Removal and refitting of seat belt 10.2.6.1 Removal and refitting of front left seat belt body assembly Removal procedure Note: – The removal and refitting of the left seat belt body assembly is described here, which can be referred to for the operations on the right side. – Static electricity can cause the airbag to be triggered accidentally. Static electricity must be discharged before the servicing on the system for protection. The body can be touched for a short time. 1. Turn off all electrical appliances and the start switch. 2.
Disconnect the battery negative terminal (refer to 3.1.6.1 Maintenance and inspection of battery ) 3. Remove the left B-pillar lower protective plate assembly (refer to 8.5.5.2 Removal and refitting of B- pillar lower protective plate assembly) 4. Remove the front left seat belt body assembly. a. Disconnect the connector of left seat belt body assembly. VOYAH FREE