10-370 A/C and safety system 10. A/C and Safety System 10.2.6.2 Removal and refitting of front left seat belt height adjuster Removal procedure Note: – The removal and refitting of front left seat belt height adjuster is described here, which can be referred to for the operations on the right side. – Static electricity can cause the airbag to be triggered accidentally. Static electricity must be discharged before the servicing on the system for protection. The body can be touched for a short time. 1. Turn off all electrical appliances and the start switch. 2. Disconnect the battery negative terminal (refer t o 3.1.6.1 Maintenance and inspection of battery ) 3.
Remove the left B-pillar upper protective plate assembly (refer to 8.5.5.3 Removal and refitting of B- pillar upper protective plate assembly) 4. Remove the front left seat belt body assembly (refer to 10.2.6.1 Removal and refitting of front left seat belt body assembly) 5. Remove the front left seat belt height adjuster. a. Unscrew 1 fixing bolt of the left seat belt height adjuster. Tightening torque of bolt: 50±8Nm. b. Remove the left seat belt height adjuster ① . Refitting procedure The refitting procedure is performed in reverse order. VOYAH FREE