10-378 A/C and safety system 10. A/C and Safety System 10.2.7 Removal and refitting of passive safety control and sensor 10.2.7.1 Removal and refitting of front impact sensor Removal procedure Note: – The removal and refitting of the left front impact sensor is described here, which can be referred to for the operations on the right side. 1. Turn off all electrical appliances and the start switch. 2. Disconnect the battery negative terminal (refer t o 3.1.6.1 Maintenance and inspection of battery ) 3. Remove the front wheel housing mudguard assembly (refer to 8.6.4.1 Removal and refitting of front wheel housing mudguard assembly) 4. Remove the left front impact sensor. a.
Disconnect the left front impact sensor connector. b. Unscrew the fixing bolts of the left front impact sensor. Tightening torque of bolt: 9±1Nm. c. Remove the left front impact sensor ① . VOYAH FREE