5-18 Electric drive system 5. New Energy Power System d. Remove front drive motor ① . Refitting procedure The refitting procedure is performed in reverse order. CAUTION: - After refitting chassis parts, change the brake fluid with new fluid, discharge the air and do not mix new and old brake fluid. - Change drive motor reducer oil with new oil according to standard parameters of the drive motor. - After the entire vehicle is refitted, carry out four- wheel alignment and road test of the vehicle to confirm that there is no deviation or abnormal noise. - Coolant cannot be reused, mixed or replaced with that of different colors.
- Fill coolant to the required position and close the water reservoir end cover. - Coolant recovery must be handled in accordance with relevant national regulations. - Connect battery negative terminal. - Before refitting, add brake fluid. VOYAH FREE