Park Distance Control Switching on and off Please refer to and at the start of the chapter on page 127. Introduction This chapter contains information on the follow- ing subjects: – Switching on and off 127 – Displays 128 – Troubleshooting 128 Park Distance Control assists the driver when parking. Working principle Park Distance Control uses sensors in the front and rear to detect the distance of the vehicle from an obstacle (depending on equipment). Fig. 100 In the upper section of the centre console: Park Distance Control button (illustration). Switching on – Park Distance Control switches itself on auto- matically when you engage reverse gear or be- gin reversing the vehicle.
If there is an obstacle within the sensor's detec- tion range, the system will make a warning sound. → . The display along the side of the ve- hicle may may different depending on the situa- tion. – or : Depending on the vehicle, the Park Dis- tance Control will be automatically activated when the button is pressed to switch on the Area View camera. Settings Depending on model,Park Distance Control can be made in the Infotainment system. For exam- ple, the volume of warning sound. Switching off – Park Distance Control switches itself off auto- matically when you drive forwards at a speed of more than 10 km/h to 15 km/h.
Park Distance Control cannot replace the driv- er’s attention and operates only within the lim- its of the system. Failure to comply may result in serious or fatal injury and damage to the ve- hicle. WARNING – or : Move the selector lever to position P . – or : press the button in the Infotainment system. – or : switch on the electronic parking brake. Switching on and off the acoustic warning – Press the button . ● Park Distance Control is not a substitute for the full concentration of the driver. NOTICE Red-coloured image segment: close obstacle. Do not drive on! 182.5C1.TRO.74 Parking and manoeuvring 127