4. You can perform Rated Capacity, Rated Output, and Zero-balance on this page. The page also indicates the state of the load sell input unit. Implement calibration according to the procedure described in NX-Series Load Cell Input Units User's Manual (W565). 13 Name Description Rated Capacity Specifies the rated capacity of the load cell. Rated Output Specifies the rated output of the load cell. Zero-balance Specifies the zero balance of the load cell. Stable status indicator Indicates the stable status of the load cell input unit as follows: Lit: Detected the status where the gross weight value / force measurement value of the load cell input unit is stable.
Not lit：Not detected the status where the gross weight value / force measurement value of the load cell input unit is stable. Net Weight display Indicates the net weight value measured by the load cell input unit. Total Weight display Indicates the gross weight value measured by the load cell input unit. Settings button Pressing this button reflects the values set inRated Capacity, Rated Output, and Zero-balance respectively in the load cell input unit.