２ Precautions (1) When building an actual system, check the specifications of the component devices of the system, use within the ratings and specified performance, and implement safety measures (2) For safe use of the system, obtain the manuals of the component devices of the system and such as safety circuits to minimize the possibility of an accident. check the information in each manual, including safety precautions, precautions for safe use. (3) It is the responsibility of the customer to check all laws, regulations, and standards that the (4)All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, system must comply with.
or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of OMRON. (5) The information in this guide is current as of April 2016. No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is constantly striving to improve its high-quality products, the information contained in this guide is subject to change without notice. (6) The operation of each design template has been tested using the device configuration indicated in sections 4 and 5-2 of this guide. The display operation after incorporating the templates is not guaranteed.
Special information in this document is classified as follows: Precautions for Safe Use Indicates precautions on what to do and what not to do to ensure safe usage of the product. Precautions for Correct Use Indicates precautions on what to do and what not to do to ensure proper operation and performance. Additional Information Additional information to read as required. This information is provided to increase understanding or make operation easier. Copyrights and Trademarks Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan and other countries for OMRON factory automation products.
Screenshots are used in accordance with Microsoft Corporation guidelines. Windows is registered trademark of Microsoft Corporation in the USA and other countries. EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany. Company names and product names in this document are the trademarks or registered trademarks of their respective companies. 7