Preparation before using the vehicle Remote checking of car status You can use the ZEEKR App to check the following conditions and make sure the car is ready for the trip before driving: ■ Tire pressure and temperature. ■ Remaining power. ■ Endurance mileage. ■ Inside temperature. ■ Car location. NOTE ■ After turning off the location services, the car can not be located through ZEEKR App. Safety check Always pay attention to the following before driving: ■ Make sure that all lights and indicators are working properly. ■ Check that the tire pressures are within the recommended range (you can find the recommended tire pressure values on the tire pressure label on the driver ’ s side B-pillar).
■ Make sure that all window glasses are clean and with good visibility. ■ Make sure the driver seat, steering wheel and rearview mirrors are adjusted to the right positions. ■ Make sure no failure warning light comes on or no warning message is displayed on the instrument. ■ Make sure that no objects can interfere with the pedals. ■ Ensure that all loaded items are secured in place. - Safety & Security - Privacy on the center display to activate/deactivate the location services. You can touch Car locator You can use the following methods to find your car when you forget where you parked it: ■ When you are close to the car :
you can find the car by pressing the UWB key lockout button twice in succession or by activating the car locator on the ZEEKR App. ■ When you are far from the car : If the upload function of location information is on, you can see and navigate to the parking spot of the car through ZEEKR App, and then use the car locator to find the car. 01 Touch the key to activate/deactivate the upload function of location information. 19