Connect with Mi Home/Xiaomi Home App This product works with Mi Home/Xiaomi Home app*. Control your device with Mi Home/Xiaomi Home app. To use this product, it is a must to download and install the Mi Home/Xiaomi Home app. Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search "Mi Home/Xiaomi Home" in the app store to download and install it. Make sure your phone has connected to the 2.4 GHz Wi-Fi. Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device. * The app is referred to as Xiaomi Home app in Europe (except for Russia).
The name of the app displayed on your device should be taken as the default. Note: The version of the app might have been updated, please follow the instructions based on the current app version. Make sure the camera turns on and the network connection is stable during connecting. The indicator is quickly blinking orange when waiting for a connection, and turns into blue once the camera is successfully connected. Restoring factory setings If the network connection or the Mi account that the camera is paired with has been changed, you need to restore the factory setings. Press and hold the reset buton for about three seconds.
Once the indicator starts quickly blinking orange, the factory setings have been restored successfully. Then you can reconnect the camera with the app. Note: Restoring factory setings will not delete the content on the microSD card. 6