Care & Maintenance Maintenance Precautions Cleaning the Vacuum Cleaner Cleaning the Dust Compartment, Pre-filter, and Cyclone Assembly Always use genuine parts to keep your warranty from being voided. If the filter, extension rod, or high torque brush bar becomes clogged, the vacuum cleaner will stop working shortly. To restore its functionality, clean the clogged component. If the vacuum cleaner will not be used for an extended period, fully charge it and disconnect it from the power then store it in a cool, low-humidity environment away from direct sunlight. To avoid over-discharging the battery, recharge the vacuum cleaner at least once every three months.
Wipe the vacuum cleaner with a soft, dry cloth. 2. Press the dust compartment bottom cover release button, then empty the contents. 1. The vacuum cleaner's cleaning ability will be reduced if the dust compartment is filled to the "MAX" mark. To regain performance, empty the dust compartment in a timely manner. Before emptying the compartment, make sure the vacuum cleaner is disconnected from the power, and do not press its power button. 10 11