Avoid dropping, shaking or hiting the massage gun. Strong impacts may damage the components or cause abnormal operation. If the above occurs, please consult the afer-sales service team in a timely manner. Continuous use of the massage gun over a long period of time may cause a rise in its surface temperature, which may cause damage to it. Do not use it too long at a time. In the event the massage gun heats up, emits smoke or buzzes excessively, etc., stop using it immediately and contact the afer-sales service team. If the massage gun becomes overheated or deformed, swells, or the batery leaks during use, stop using it immediately and contact the afer-sales service team.
WARNINGS The massage gun will no longer be usable once the batery is removed. The following steps should only be completed upon the permanent disposal of the massage gun. Do not dismantle the massage gun on your own for routine maintenance. 1. Disconnect the massage gun from the power supply and remove the shell. 2. Cut off the cables connecting the batery, motor and NTC in sequence. 3. Remove the batery and use insulating glue to seal broken cable surfaces. 4. Dispose of the batery at a designated recycling facility, and follow all local environmental protection laws, regulations and guides when doing so. CAUTIONS The batery must be removed before disposing of the massage gun.
Disconnect the massage gun from the power supply before removing the batery. The massage gun must only be dismantled by a professional.