Replacing the Filter Note: To avoid injuries, do not put your fingers between the upper and lower compartments when replacing the filter. Warning: Make sure the purifier is turned off and the power adapter is unplugged before replacing the filter. 1 Opening the filter compartment Removing the old filter Installing the new filter 2 3 Press and hold the release buttons with both of your hands, and lift up the upper compartment of the purifier. Remove the old filter upwards. Install the filter into the filter compartment, and then place back the upper compartment of the purifier.
4 Resetting the filter While the purifier is on standby, simultaneously press and hold the power button and the display on/off button on the back of the purifier for 7 seconds. Once the filter is successfully reset, the purifier will make two beeps and the air quality indicator will blink green three times. Notes: · When the air quality indicator blinks red for 30 seconds, it is a reminder that the filter is exhausted. · It is recommended to replace the filter every 6 to 12 months. · Please purchase genuine and compatible filters from official channels. 8