Daily Care & Maintenance Enabling/Disabling Wi-Fi Warning: Make sure the purifier is turned off and unplugged before performing the following operations. Simultaneously press and hold the mode switch button on the display and the brightness adjustment button for 7 seconds. The purifier will make a notification sound and the Wi-Fi will be disabled. While Wi-Fi is off, simultaneously press and hold the mode switch button on the display and the brightness adjustment button for 7 seconds. The purifier will make a notification sound and the Wi-Fi will be enabled. Cleaning fan blades and air duct · Press the indentation on the cover to open it.
Use a screwdriver to loosen the screw, and then pull the cover upwards to remove the grille. · Use a vacuum cleaner to remove any dust from the air duct and fan blades, or wipe the dust off gently with a soft cloth. · Use a brush or soft cloth to gently wipe the negative ion transmitter. · Install the grille back and fasten the screw after cleaning. Note: To avoid missing, the screw is not removable. Loosen the screw to remove the grille. 025 Open Mi Home / Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device. *The app is referred to as Xiaomi Home app in Europe (except for Russia).
The name of the app displayed on your device should be taken as the default. Note: The version of Mi Home app might have been updated, please follow the instructions based on the current app version. EAED95A7 7 Connect wit This product Control your Connect wit This product Control your h Mi Home / Xiao works with Mi Hom device with Mi Hom Scan the QR code to d will be directed to the is installed already. Or in the app Store to do mi Home App e / Xiaomi Home ap e / Xiaomi Home ap ownload and install the app. connection setup page if the search "Mi Home / Xiaomi Ho wnload and install it. Note: To avoid damaging the the air duct and fan blades di with a soaking wet cloth.
Negative Io Transmitter purifier, do not rinse or spray rectly with water, or wipe them