Connecting with Mi Home/Xiaomi Home App This product works with the Mi Home/Xiaomi Home app*. Use the Mi Home/Xiaomi Home app to control your device, and to interact with other smart home devices. Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search "Mi Home/Xiaomi Home" in the app store to download and install it. Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add your device. * The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default. Note:
The version of the app might have been updated, please follow the instructions based on the current app version. Wi-Fi Status Operating Modes Status Display Awaiting connection Connecting Wi-Fi icon blinks quickly Wi-Fi icon blinks slowly Connected Wi-Fi icon remains lit Note: When Wi-Fi is not connected, the Wi-Fi icon will blink. If the blender is not connected to any Wi-Fi network for 30 minutes, the Wi-Fi icon will go out. Operating Instructions 1. Take out the blender and clean the lid plug, lid, and tamper. 2. Wash the ingredients, cut them into 3 cm cubes, and place them in the jar. 3. Install the lid plug onto the lid, and turn the lid clockwise to lock it with the jar. (Figure 1) 4.
Place the jar onto the base properly by aligning the small triangle under the handle with the marking on the base. Ensure the base is placed on a stable surface. (Figure 2) 5. Once the blender is powered on, turn the knob to cycle through functions. When the desired function appears on the screen, press the knob to enable it. (Figure 2) (Figure 1) 06