Troubleshooting Specifications Name: Fan Heater Model: LSNFJ02LX Rated Voltage: 220–240 V~ Rated Frequency: 50–60 Hz Rated Power: 2000 W Natural Mode Power: 12 W Item Dimensions: 184 Ч 184 Ч 500 mm Net Weight: Approx. 2.2 kg Operation Frequency: 2400–2483.5 MHz Maximum Output Power: Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user. 7 Issue Possible Cause Solution The heater is not connecting to power. The power cord is not plugged in properly. Check whether the plug and the power cord are plugged in properly. The heater is not turned on. Press the power button to turn the heater on.
The heater is not placed steadily. Place the heater steadily on a level surface. The heater does not work. The heater is not started. Press the on/standby button on the control panel to start the heater. The temperature is too high, and the heater automatically turns off to ensure safety. Keep the air inlet and the air outlet clear and unobstructed, and restart the heater after it cools down. The child lock function is enabled. Disable the child lock. The heater cannot be found in the app. The network connection fails. Reset the Wi-Fi. The Wi-Fi signal is weak. Keep the phone and the heater close to the Wi-Fi signal source. The power cord is not plugged in properly.
Plug the heater in properly and turn it on again. The heater makes unusual sounds when it is moved or shaken. The steel ball in the anti-tilt switch rattles. Place the heater on a level surface steadily and avoid shaking it violently.