User's Guide Network Settings 3. Select Manual Network Setup , and then press the OK button. 4. Enter the device name. You can enter the following characters. To fix the device name, move the cursor on the Done , and then press the OK button. ❏ Character limits: 2 to 15 (you must enter at least 2 characters) ❏ Usable characters: A to Z, a to z, 0 to 9, -. ❏ Characters you cannot use at the top: 0 to 9. ❏ Characters you cannot use at the bottom: - Note: If you press the OK button without entering the device name, the default device name (EPSON and the last six digits of the device's MAC address) are set. 5. Select the method for acquiring the IP address (TCP/IP Setup).
❏ Auto Select when you are using an access point at home or you are allowing the IP address to be acquired automatically by DHCP. ❏ Manual Select when you do not want the device's IP address to be changed. Enter the IP address, subnet mask, default gateway, primary DNS server, and secondary DNS server according to your network environment. Press the OK button, and go to step 7. 6. Select the method for setting the DNS server. ❏ Auto Select when you want to acquire the IP address automatically. ❏ Manual Select when you want to set a unique DNS server address to the device. Enter the addresses for the primary DNS server and the secondary DNS server. 7.
Select whether or not to use a proxy server. ❏ Do Not Use Select when you are using the printer in a home network environment. ❏ Use Select when you are using a proxy server in your network environment and you want to set it to the printer. Enter the proxy server address and port number. 8. Check the settings and press the OK button. A message is displayed on the LCD screen when the network settings are complete, and you are returned to the home screen after a short period of time. 25